Police and law enforcement authorities at the local, state and national level are regularly called upon to enter the underwater world to do their jobs. Underwater search & rescue, recovery and investigations are time sensitive operations often performed in extremely challenging conditions. In emergency situations, the first ones to enter the water are Public Safety Divers (PSDs), which include police, sheriffs, fire rescue, and specially trained Search and Rescue (SAR) dive teams. From under ice search and recovery performed at night on thin ice to criminal forensics evidence retrieval in polluted or fast-moving water to port security hull inspections in busy waterways – there are many conditions which are too dangerous for public safety divers to enter the water. In cases such as these, an inspection class remotely operated vehicle (ROV) is the preferred tool to quickly and safely complete the task.
Important Features for Security and Law Enforcement ROVs:
When planning underwater missions for security, law enforcement, and recovery, key features which are required for an ROV to perform under demanding conditions include:
HD pan & tilt camera: When performing visual inspections, HD video and images help you see the underwater world in greater detail, allowing authorities to discover, positively identify, and record HD video and images of mission targets:
High intensity LED lights:
Underwater search and recovery missions are extremely time sensitive. When operating at night, and when diving deep, high powered LED lights are needed to illuminate the underwater world to continue the search.
Sonar: Lakes, streams, ponds, oceans – each body of water can have limited visibility due to particles in the water, dissolved organic matter, as well as temperature and salinity gradients. When visibility is low, an underwater camera becomes significantly less effective than sonar, which provides an accurate picture of the ocean floor using only sound – targets can be located without being seen directly:
Grabber arm: When an underwater target is positively identified, such as forensics evidence, a grabber arm is deployed from the front of an ROV to securely grip the object for retrieval at the surface:
GPS Location: When a search is conducted, it’s important to keep search vehicles within a search grid, or focused at a last known location. On-board GPS allows an ROV to accurately report its location. When points of interest are identified, those surface locations are recorded.
Powerful thrust: Operating in fast moving water such as rivers, tidal channels and open ocean currents can quickly tire divers, Only the most powerful ROVs can provide enough thrust to operate effectively in moving water.
On-board battery power: When deploying search missions in remote areas, it’s important to consider how much equipment needs to be hauled in to get started. ROVs with on-board battery power operate independently of a topside power source and can be deployed in the most remote areas.
Temperature rating: Coastal water temperatures can often approach freezing during the winter months. For prolonged dives, even the best dry suit becomes ineffective and will severely limit search times. ROVs with operating temperature ranges Down to -10° Celsius/14° Fahrenheit allow vehicles to operate under the ice all winter long.
Deployment speed: During Search and Recovery, time is of the essence. ROV systems must be quickly deployed in just a few minutes in order to be effective.
Video recording & cloud storage: ROVs can record all aspects of a mission, most importantly, video, images and sonar. Recording these files can prove invaluable when used as direct evidence, and for future mission training.
No matter the mission, when security and law enforcement officers enter the underwater world, they are placed at a significant disadvantage. ROVs designed for police and law enforcement use help tip the scales back in favor of the mission. When piloted by an experienced operator, ROVs can help to speed up missions while reducing risk to divers.
UUV Aquabotix Ltd (ASX:UUV) (“Aquabotix" or the “Company”) today introduced its second-generation hybrid underwater vehicle, the Integra AUV/ROV (autonomous underwater vehicle/remotely operated vehicle). Single-person deployable, portable and lithium ion battery-powered, the Integra AUV/ROV allows users to conduct multiple underwater missions, while providing a cost-efficient alternative to deploying separate AUVs and ROVs for individualized tasks.
The Integra AUV/ROV can be configured with multiple sensors and maneuvered by an easy-to-use intuitive platform accessible from any web-enabled device. The vehicle is designed for use across several sectors, including law enforcement, research, environmental assessment, defense and infrastructure, and can search wide areas using AUV mode (untethered) while conducting detailed inspections using ROV mode (tethered). Users can easily switch from AUV mode to ROV mode by attaching the tether to remotely control the vehicle’s six degrees of freedom of motion. When running the vehicle in autonomous operation, all mission planning is completed in an intuitive Windows-based application.
“With the Integra Hybrid AUV/ROV, we have added more functionality to a single vehicle,” said David Batista, CEO of Aquabotix. “Because this vehicle has the brain power to conduct autonomous missions as well as detailed inspections in a single setting, operators have immediate and complete control. The introduction of the Integra AUV/ROV is the next step in the evolution of underwater vehicles and illustrates how Aquabotix continues to successfully meet the demands of underwater exploration and inspection.”
Other features of the Integra AUV/ROV include:
“Our second-generation hybrid, the Integra, leverages the strongest innovative capabilities of both types of underwater vehicles. Yet in utilizing our hybrid digital platform, users no longer need two vehicles to explore and conduct tasks underwater. Now, they can activate AUV mode for broad range searches, while switching to ROV capabilities for more in-depth analysis of underwater conditions,” said Durval Tavares, Chief Technology Officer of Aquabotix. “Simply put, the Integra AUV/ROV is a force multiplier for our customers.”
Aquabotix recently announced its new Live Remove Control product feature, which customers can use to pilot underwater vehicles, store, analyze and share data, from any web browser-enabled device, remotely, from anywhere in the world. Aquabotix’s entire family of products, including the Integra, are now equipped with this class leading functionality.
To watch the Integra AUV/ROV in action, please visit:
UUV Aquabotix Ltd (ASX:UUV) (“Aquabotix" or the “Company”) today introduced Live Remote Control, which allows users to pilot Aquabotix’s underwater vehicles and cameras from any web browser-enabled device, remotely, from anywhere in the world. This class-leading technology has applications for any business, research centre, security force of defence unit with a multi-site presence in the underwater world.
Live Remote Control enables users to operate Aquabotix’s Endura ROV (remotely operated vehicle), Hybrid AUV/ROV (autonomous/remotely operated vehicle) and AquaLens Connect (networked underwater camera system) during underwater activities from any location globally, using browser-based devices such as computers, phones and iPads, over the Internet, without the operator being physically present on-site.
Below is an artist’s rendering of Live Remote Control’s applicability to the aquaculture sector. For example, the operator could be sitting in the head-office in Norway, and controlling an Endura in a fish net at an aquaculture farm off the coast of Chile, thousands of miles away.
Importantly, Live Remote Control also enables multiple operators (in multiple global locations, if needed) to operate the same unmanned underwater vehicle.
Live Remote Control is designed to expand the virtual presence of Aquabotix’s product users, allowing them to better monitor what’s happening at all times, while sharing data across multiple sites. The web-driven innovation also reduces the need for increased or expensive on-site manpower for underwater operations.
This method of operation is conceptually somewhat similar to how the world’s technologically most advanced militaries have, for years, operated battlefield aerial drones from safe locations outside of the theatre of war.
“With Live Remote Control, any browser-based modern device can now interact with our system,” said Durval Tavares, CEO of Aquabotix. “Having our customers operate unmanned systems underwater in a live, immediate fashion, from anywhere in the world, is a game-changer for the underwater robotics industry. Advances in underwater unmanned systems typically lag those in the aerial domain by several years. Aquabotix is proud that the smart computing power of its vehicles enables the company to achieve innovations like these, which are at the forefront of advances in the industry.”
“Driving an underwater vehicle through a web browser previously seemed impossible,” said Ted Curley, Chief Development Officer of Aquabotix. “Live Remote Control now changes the timeline for how underwater processes can be accomplished both on land and under the sea.”
One of the most common reasons for divers or ROVs to go into the water is to search for something. The “something” can be enormously variable – an engine that fell off a boat, a weapon, a human body, a sunken ship, an automobile – but regardless of the type of object being searched for, there are some common search patterns that are worth knowing about.
The arc search, also known as a half-moon or semi-circular search, is a very simple and effective search pattern frequently employed by divers looking for large objects (such as automobiles) or working on non-flat bottoms. In the arc search pattern, the diver works at one end of a taut tether, while a stationary handler holds the other end of the tether. The handler establishes visual or other landmarks on each end of the arc, and the diver moves along the arc, keeping the tether taut so as to maintain the proper distance.
When the diver reaches one end of the arc, the handler reels the tether in by a distance determined by the nature of the search. In general, the larger the object being searched for, the larger a distance the diver will be reeled in. Then the diver proceeds back along the arc at the new, shorter, distance, and the process repeats itself until the entire area of the arc has been covered.
Arc searches are fast, but have a couple of downsides. Although they work well even in scenarios where the bottom changes contour dramatically, this means the diver has to continually equalize their pressure. In addition, if there is a lot of bottom growth (such as weeds), the tether will tend to accumulate that growth quickly and this can put a lot of weight on the line, creating an entanglement hazard for any divers in the area.
Arc searches employing ROVs alone can be very practical. Since the ROV already has a tether, the operator can simply lock the tether length in place in order to perform each leg of the arc search, then reel in tether to set the distance for the next leg. ROVs can also augment a human-performed arc search by following the same pattern and employing sonar in addition to the diver’s visual search.
A circular search pattern can be used by one diver, but can use any number of divers, making it a popular choice when searching very large areas. In a circular search pattern, an anchor marker is dropped at the center of the search. A tether is attached to the anchor, and one or more divers take up stations along the tether at predetermined distances. Each diver marks their starting position so that the team will know when a complete circuit has been made. The divers then swim a complete circle, keeping the line taut. When a complete circuit is made, the divers move to new positions along the line, and the process is repeated. When the line length starts to make the search impractical, a new center point can be chosen and a new search initiated.
The disadvantages of a full circular search are that the search is not very tolerant of bottom variations, since all the divers need to be on the same line. If multiple searches must be done over a wide area, of necessity there will be considerable overlap between the searches, hindering efficiency. In addition, if a large area is being searched, the divers on the outer portion of the search will have to move faster than the divers on the inner portion, which can result in a hasty search that does not thoroughly cover the target area.
ROVs can be used in a circular search pattern to replace or augment human divers, just as on an arc search.
A compass search is a search which relies on the use of underwater compasses rather than search lines for navigation. A compass search may be needed in an area of rough terrain where a line would quickly become entangled, or in visibility conditions so poor that orienting to the line may be difficult or impossible. In a compass search, divers use wrist compasses or inertial navigation devices to maintain proper orientation.
A common type of compass search is the spiral box. In the spiral box search, a diver starts at the estimated position of the target, and then swims in a cardinal direction for a distance about as far as he or she can see under current conditions, counting the number of kicks it takes to cover that distance. The diver then turns 90 degrees, using the compass to set the bearing, either clockwise or anticlockwise depending on the layout of the area, and takes the same number of kicks before turning (in the same direction as before) and then swimming for twice that number of kicks.
For example, if the number of kicks is 10, the diver might kick 10 times, turn clockwise, kick 10 times, turn clockwise, kick 20 times, turn clockwise, kick 20 times, turn clockwise, kick 30 times, and so on. In this way an expanding box is searched, with the compass being used to ensure that the diver is actually covering the correct area. ROVs can make an outstanding contribution to this type of search, since their positioning sensors are more reliable than a diver using a compass; using an ROV to handle the navigation elements of this type of search can free the diver to devote 100% of his or her attention to the actual search.
The jackstay search, also known as a jackleg search or a Z-search, is a very powerful search pattern that is almost guaranteed to find even small target objects, if they are within the search area. It can be used by one or two divers at a time, and it works well in areas where there is either a flat bottom or a consistent slope, such as an embankment. In a jackstay search, two weighted anchors are placed at opposite ends of the search area, with a line taut between them. The diver proceeds along the line, searching along the path. When the diver reaches the terminal anchor, he or she moves the anchor by a short distance, between 60 and 80 percent of the visibility range, in the direction of the search progression. The diver then moves back along the line, covering some new ground and a lot of old ground. When they reach the other terminal, they repeat the process, so that the search line is moved a few feet at a time through the entire search zone. A second diver can follow the first, providing additional coverage.
The disadvantage of the jackstay search is that it is slow and labor-intensive. An ROV can make a major contribution to the efficiency of a jackstay search by filling the role of the backup diver, following the human diver through the pattern and providing both a second set of eyes and a sonar backstop to the visual search.
There are literally dozens of common search patterns, many with specialized applications for certain conditions, and we have only discussed a few of the most commonly used patterns here. However, ROVs can make an excellent addition to almost any search pattern, whether to directly search, to provide navigation and orientation support for human divers, or to conduct preliminary assessments of search areas without risking human divers in dangerous waters.
In the post-9/11 era, the security of sea and river ports became an issue of great and pressing public
concern. Thanks to the efforts of multiple layers of government and private security, no major terrorist
attacks at US ports have occurred since that dark day. However, port security remains a critical area for national and local law enforcement, and it is an area where remote operated vehicles (ROVs) such as the Endura 100 SLE can make major contributions.
There are 360 commercial sea and river ports in the United States alone, and those ports handle
approximately one-fifth of the global maritime trade. These ports handle more than 70,000 large ships
(and an innumerable plethora of smaller craft) annually, carrying more than two billion tons of cargo in
and out of the United States. Securing and ensuring the safety of that much traffic is a job of stupendous
ROVs can help with this task in a number of important ways.
The underwater physical infrastructure of the port itself, as well as the submerged hulls of vessels using
the port, are key areas for port security concerns. However, visual inspection of these zones is often
problematic. Ports are highly-trafficked areas, which creates safety concerns for human divers. In
addition, the visibility conditions beneath ships and around piers are often exceptionally poor. Silt
movement from tidal flows and bottom stirring from vehicle traffic can make it almost impossible for a
human diver to see.
ROVs like the Endura 100 SLE ROV can be equipped with 360-degree scanning sonar, allowing the
ROV to see things where a human diver would be helpless. In addition, ROVs can engage in much longer
dives than humans. This allows exhaustive search scenarios that would be extremely expensive if human
divers were deployed.
In situations where visibility is better, the Endura 100 SLE has the ability to record 1080p
high-quality video. This permits the ROV to be deployed as an eyes-on monitoring station at a fixed
point or along a patrol route for hours at a time, again far exceeding the capabilities of a human diver.
Underwater surveillance and monitoring missions are thus made much more practical and affordable.
Vehicle hull inspections are an area where the positioning capabilities of Aquabotix ROVs can provide a
unique edge. Most hull inspections do not attempt exhaustive coverage of the entire hull area, because
this is impractical and would take too long – instead, inspections focus on a number of fixed high-value
points of interest. The Endura 100 SLE has advanced positioning software which makes programming
a search of these known points practical and straightforward.
ROVs are capable of carrying out advanced port security missions even without being controlled by
highly-paid professionals. Anyone can learn the basics of “flying” a Endura 100 SLE in just a few hours
of practice, and mastery takes only a few days. In addition, the low weight and easy handling
characteristics of the Endura 100 SLE mean that a single operator can carry the unit to the point of
launch, control it throughout the mission, and retrieve it single-handedly, keeping costs to the bare
Port security workers can control the Endura 100 SLE through a simple and intuitive iPad application,
or using a wireless handheld controller. In addition, the video and sonar data produced by the ROV is
stored on-board – no additional recording devices are required. Date and time stamps on the media
make the use of ROV-acquired data easy to document for law enforcement purposes.
Perhaps the most critical contribution an ROV can make to port security efforts comes from the fact
that, in the worst-case scenario, the ROV is expendable in a way that a human diver never will be. Port
security often involves investigating strange objects, which could easily be explosive devices or even
worse. An investigation of such an underwater device using human divers is risky at best and may have a
tragic outcome. ROVs can fearlessly investigate such threats with the worst-case scenario being merely
the loss of some metal and plastic. This allows port security to aggressively investigate suspicious objects
in a way that simply can’t happen relying on human divers alone.
Port security will never be an easy task, and the problems facing port security forces are likely to grow along with the volume of business done at the port. Every new problem inspires the creation of new tools, however. ROVs like the Aquabotix Endura 100 SLE can expand the ability of port security forces to keep their facilities and visitors safe, at a reasonable cost.